MLD PYRAMID INNERNETS ™
Versatile Ultra Light Protection.
WEIGHT: 9 – 24 oz | 256 – 680 gm
2024 Floor Color is 20d SilPoly OD Green.
Add MLD Pyramid InnerNets ™ to any MLD Pyramid Shelter to create an ultra-light double walled tent that is both modular and strong in wind, rain, and snow. Dual-purpose, the InnerNet can also be set up as a stand alone for warm summer nights, or as an emergency mosquito shield alongside the trail.
This is the bug shelter used by Andrew Skurka on his incredible 4,700 mi | 7,564 km Alaska Yukon Expedition with his MLD SoloMid – for HEAVY insect populations!
Our InnerNets ™ are constructed with your choice of super waterproof 20d Pro SilPoly or .75 DCF floor, with 4.5 in | 12cm bathtub walls. The top mesh is .7 Nanoseeum® bug netting.
Our InnerNets are designed to fit perfectly under all the MLD Mid Series Pyramid Shelters that are the same size or larger and can fit under many other shelters and tarps!
FEATURES
• Intended to be part of a light weight shelter system.
• Waterproof OD Green 20D Pro SilPoly or DCF Light Green Floor – Both Very High Hydrostatic WP Rating 3000+HH
• Nanoseeum ® .7 bug netting
• 4.5in | 12cm hanging side walls
• LineLocks at each corner make attachments to Pyramid shelter corners easy.
• Dual Slider #3 YKK Zipper
• Full Arch Zipper – One continuous zipper starts near the lower corner, goes up on the side and arches over the top peak and back down to the opposite corner. Creates a very large opening for easy in/out.
• Two full length trekking poles can be used in an inverted V outside the Solo InnerNet. Two inverted poles plus a 12″ pole jack each will work under a DuoMid our SoloMid XL.
• About 3-6″ separation from netting wall to the pyramid outer wall.
• DUO & SUPER: Cinch cord open top lets you extend the center pole through the InnerNet peak. Use an MLD Pole Jack and use the trekking pole’s tip up with a Pole Jack on top so the soft trek pole handle is on the floor.
• DUO & SUPER: Reinforcement of DX 210D RipStop in the center of the floor on the Duo and Super for using a trek pole inside and through the top of the InnerNet to support a Mid.
INCLUDES
• SilNylon Stuff Sack
• 1/8″ Bungee cord for corner linelocks.
COLOR: Citrus Orange Floors
MODEL: 2020 SOLOMID XL INNERNET
–
DIMENSIONS: 90″ Long x 32″ Wide x 46″ Tall | 229cm x 81cm x 116cm
MATERIAL: Pro SilPoly Floor
WEIGHT: 11oz | 311gm
MATERIAL: .75 DCF (Dyneema® Composite Fabric A.K.A. Cuben Fiber) Floor
WEIGHT: 10oz | 283gm
Fits the SMXL Pyramid and all larger Mids.
MODEL: DUO INNERNET
DIMENSIONS: 90″ Long x 50″ Wide x 46″ Tall | 229cm x 125cm x 115cm
* Will fit two people. If either person is over 6′, or uses a long bag, better to lie head-to-foot for more room. NOT recommended if either person is over 6’2″.
MATERIAL: Pro SilPoly Floor
WEIGHT: 14 oz | 414gm
MATERIAL: .75 DCF (Dyneema® Composite Fabric A.K.A. Cuben Fiber) Floor
WEIGHT: 12 oz | 302 gm
Fits only the DuoMid Pyramid.
MODEL: DUO XL INNERNET
DIMENSIONS: 90″ Long x 50″ Wide x 52″ Tall | 229cm x 125cm x 130cm
*Will fit two people. Fits half the SuperMid.
MATERIAL: Pro SilPoly Floor
WEIGHT: 14 oz | 414gm
MATERIAL: .75 DCF (Dyneema® Composite Fabric A.K.A. Cuben Fiber) Floor
WEIGHT: 12 oz | 302 gm
Also fits half the SuperMid.
MODEL: SUPERMID INNERNET
FITS: SUPERMID
DIMENSIONS: 90″ Long x 90″ Wide x 58″ Tall | 229 cm Long x 229 cm Wide x 145 cm Tall
*Palace for Two – Great for Three – Four can get a bit friendly!
MATERIAL: Pro SilPoly Floor
WEIGHT: 24 oz | 680 gm
MATERIAL: .75 DCF (Dyneema® Composite Fabric A.K.A. Cuben Fiber) Floor
WEIGHT: 18 oz | 510 gm
The very first time you set up your Innernet with your Mid or TrailStar, it will take about 10-20 mins to get the pitch correct, but after the corner bungee loops are tied and adjusted the InnerNet and pyramid shelter will mate and set up quickly! You can leave it clipped in to the outter Mid for quick field set up and break down.
FIRST SET UP
1. First set up you PyraMid or TrailStar well so that the edges of the shelter are a few inchs off the ground.
2: Insert the InnerNet and cut the 1/8″ / 3mm bungee cords to attach the InnerNet corners to the Pyramid corners.
3: Clip up the InnerNet peak to the PyraMid peak. You may need a short loop of bungee cord.
4: The innernet should now be centered under the id, the f Innenet flor hangining down and all four Innernet seams tight from corner to Apex.
5: If one corner seam is lose, adjust the corners bungee cords until they are equal.
6: You may leave the InnerNet clipped to the Pyramid outter when packing for a fast set up next time.
7. We highly advise you also use McNett ZipCare on the zipper when new and then every 30 days of use for a long life.
NOTE: DO NOT OVERSTRESS THE CORNER TIE-OUTS. ONLY PULL AND STAKE THEM TIGHT ENOUGH TO GENTLY FORM THE FLOOR’S SHAPE!
SEAM SEALING
If you plan to ever be in camp spots that pool water or flow mini rivers under your shelter, We STRONGLY suggest sealing the corners.
Use SilNet Silicone Seam Sealer on the inside and outside corner seams and on any floor stitching. DCF versions are seam taped and do not need additional seam sealing.
Reviews
There are no reviews yet.