The Best All-around Ultralight Stakes Available.
8.5″ STAKES
LENGTH: 8.5″ in | 21.6 cm
DIAMETER: 0.30″ in | 7.8 mm
HEAD DIAMETER: 0.67″ in | 17 mm
6.5″ STAKES
LENGTH: 6.5″ in | 16.5 cm
DIAMETER: 0.30″ in | 7.8 mm
HEAD DIAMETER: 0.55″ in | 14 mm
MLD Carbon Fiber NanoNail ™️ Stakes were built to be the best all-around ultralight stakes available. We did not design these to be the lightest possible. Compared to other nail or tube stakes, they are stronger and more user friendly with better holding power due to extra length and a larger diameter shaft at only a few grams more. Your shelter collapsing due to stakes pulling out in the middle of the night can be prevented using NanoNail Stakes.
Cost is 25% to 40% lower than other CF stakes. Only $3.25 in a 16 stake ultimate set.
Our Carbon Fiber NanoNail Stakes were designed to be used with any type of shelter. The full size 8.5” stakes for corners of big PyraMids and tents in high wind and the smaller 6.5” stakes for secondary stakes points on medium size PyraMids, smaller shelters and tarps.
Q: Why do round shaft nail/tube stakes hold so well?
A: The Stiction Force of the displaced and compacted ground around the stake shaft exerts holding power uniformly vs a V or Y stake that disturbs the ground
more at insertion and has variable stiction over on the many stake surfaces. The NanoNail 7.8mm round shaft has enough surface area for high stiction without tearing up too much ground. A smaller CF or AL shaft or a small skewer stakes has less surface area for that high holding power, especially in softer ground.
Advantages of the NanoNail VS a similar length, girth and weight Y stake:
• Far More Holding Power
• Lighter Weight
• Easier to insert into hard ground.
• Head does not cut hands or shoe bottoms.
• Head has better retention of the guyline cord loop.
• Shaft does not hold as much mud after removal.
• Easier Cleaning
• Packs Smaller
FEATURES
• Thick Wall 8mm OD Hi Modulus Carbon Fiber Shafts.
• Oversize heads for easy insertion and guy line loop retention.
• Longer, tougher and sharper tips than other nail/ tube stakes.
• 7075 Aluminum machined (not 3D printed) heads and tips.
• Aerospace grade epoxy secures heads and tips.
• Bright pull cord loops for easy ground clutter ID and removal.











